 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com Super Fast Recovery Diode RF08L6S Series Standard Fast Recovery DimensionsUnit : mm 2.60.2 Land size figure (Unit : mm) 20 2.0 1.20.3 4.50.2 0.10.02 0.1 5.00.3 6 8 6 PMDS Features 1)Small power mold type.PMDS 2)high switching speed 3)Low forward voltage 1.50.2 2.00.2 ROHM : PMDS JEDEC : SOD-106 Manufacture date Structure Construction Silicon epitaxial planar Taping dimensionsUnit : mm 4.00.1 2.00.05 1.550.05 1.75 0.1 0.3 5.5 0.05 4.2 5.3 0.1 1.55 9.5 0.1 0.05 12 0.2 Applications General rectification 2.90.1 4.00.1 2.8MAX Absolute maximum ratingsTl=25 Parameter Symbol Repetitive peak Reverse voltage Reverse voltage Average rectified forward current Forward current surge peak Junction temperature Storage temperature VRM VR Io IFSM Tj Tstg Conditions D0.5 Direct voltage Glass epoxy substrate mounted 60Hz half sin wave, Non-repetitive Ta=25 one cycle peak value, Tj=25 Tl=100 Limits 600 600 0.8 20 150 -55to+150 Unit V V A A Electrical characteristics Tj=25 Parameter Symbol Forward voltage Reverse current Reverse recovery time Thermal Resistance VF IR trr Rth(j-l) Conditions IF=0.8A VR=600V IF=0.5A,IR=1A,Irr=0.25xI R junction to lead Min. Typ. 1 0.01 50 Max. 1.3 10 70 23 Unit V A ns W www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 1/2 2009.04 - Rev.A RF08L6S 10000 www..com Data Sheet 10 100 f =1MHz REVERSE CURRENT:IR(nA) FORWARD CURRENT:IF(A) 1 Tj=150 0.1 100 Tj=150 Tj=125 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 600 Tj=125 1000 Tj=25 10 10 Tj=75 0.01 Tj=75 1 Tj=25 0.001 0 500 1000 1500 2000 0.1 0 100 200 300 400 500 1 0 5 REVERSE VOLTAGEVR(V) VR-I R CHARACTERISTICS FORWARD VOLTAGEVF (mV) VF -I F CHARACTERISTICS 10 15 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 25 30 1100 I F =0.8A FORWARD VOLTAGE:VF(mV) REVERSE CURRENT:IR (nA) 100 Tj=25 VR=600V n=30pcs 60 f=1MHz V R=0V Tj=25 50 1050 10 1000 AVE:999.5mV 950 AVE:7.35nA CAPACITANCE BETWEEN TERMINALS:Ct(pF) Tj=25 n=30pcs 1 40 AVE:44.2pF 900 0.1 VF DISPERSION MAP I R DISPERSION MAP 30 Ct DISPERSION MAP 80 RESERVE RECOVERY TIME:trr(ns) 60 Ifsm 1cyc 8.3ms 1000 PEAK SURGE FORWARD CURRENT:IFSM(A) PEAK SURGE FORWARD CURRENT:IFSM(A) 55 50 45 40 35 30 AVE:48.8ns 60 IF=0.5A IR =1A Irr=0.25*IR Tj=25 Ifsm 8.3ms 8.3ms 100 1cyc 40 AVE:49.4A 10 20 0 1 trr DISPERSION MAP 1 I FSM DISRESION MAP 30 10 NUMBER OF CY CLES I FSM-CY CLE CHARACTERISTICS IM=10mA IF =100mA 100 1000 ELECTROSTATIC DISCHARGE TEST ESD(KV) 1000 TRANSIENT THAERMAL IMPEDANCE:Rth ( /W) 25 AVE9.80kV Rth(j-a) 100 1ms time 300us PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm t 20 100 15 10 Rth(j-l) 10 AVE2.70kV 5 1 On Glass Epoxi Board 10 1 10 TIME:t(ms) I FSM-t CHARACTERISTICS 100 0 C=200pF R=0 C=100pF R=1.5k 0.1 0.001 0.01 0.1 1 10 100 1000 TIME:t(s) Rth-t CHARACTERISTICS ESD DISPERSION MAP 0A 0V 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 0.5 1 1.5 2 half sin wav e D=0.2 D=0.1 D=0.05 D=0.8 Io t T VR D=t/T VR=480V Tj=150 D.C. 1.8 1.6 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 30 60 D=0.1 half sin wav e D=0.2 D=0.5 D.C. D=0.8 0A 0V t T Io VR D=t/T VR=480V Tj=150 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 D.C. D=0.5 FORWARD POWER DISSIPATION:Pf(W) D=0.8 D=0.5 half sin wav e D=0.0 90 120 150 D=0.2 D=0.1 D=0.05 0 30 60 90 120 150 AVERAGE RECTIFIED FORWARD CURRENTIo(A) Io-Pf CHARACTERISTICS AMBIENT TEMPERATURE:Ta() Derating Curv e(Io-Ta) LEAD TEMPARATURE:Tl() Derating Curv e(Io-Tl) www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 2/2 2009.04 - Rev.A Notice www..com Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of RF08L6S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |